in-lite BLINK 12V LED Wall Light

$100.29

Produces a wide and attractive downward light. The in-lite BLINK is a 12V low-voltage LED wall light (Wall light – Ø 100mm/3.94″) for patios & pergolas, walls & fences.

52 lumens, 2800K, IP55

SKU: N/A Categories: , ,

Description

The in-lite BLINK is a 12V low-voltage LED wall light (Wall light – Ø 100mm/3.94″) for patios & pergolas, walls & fences.

Wall fixture BLINK comes with two lenses: transparent and frosted. This makes it easy to create a focused or more diffused warm white light.

Features & Benefits

  • Produces a wide and attractive downward light
  • Designed for illuminating a fence or wall
  • Sleek and round design
  • Safe 12V low voltage — plugs into the in-lite cable with the EASY-LOCK connector, no electrician needed for the light itself
  • Weatherproof IP55 rating for Canadian outdoor use
  • 2800K warm white light with CRI 95 for natural colours

Specifications

Specification BLINK (12V)
Light direction Downward
Type of light Diffuse
Light output 52 lumens
Colour temperature 2800K warm white
CRI 95
Voltage 12V low voltage
Power / VA value 1 W / 1.7 VA (use VA to size the transformer)
Dimensions (mm) W 48 × Ø 100
IP rating IP55
Finishes Rosé Silver, Dark Grey, White
Best for Canopy, Facade, Fence/wall

What’s in the Box

  • BLINK
  • EASY-LOCK
  • 1x Diffuse lens
  • 2x Screw
  • 1x Torx wrench
  • 1x Drilling template

What You Need

Transformer

in-lite SMART HUB (app control) or in-lite HUB (light sensor and timer). Add up the VA of all lights — this light uses 1.7 VA.

Cable

in-lite 12V low-voltage cable from the transformer to the lights; CBL-EXT extension cords if the light sits further from the cable.

Masonry mounting

FIX 1 mounting plate for walls, benches and steps.

Sloped fences

FIT bracket to mount the light straight on an angled fence.

Installation Tips

Remove the Torx screw. Remove the cover cap. Also remove the plastic lens. Provide a hole of at least Ø 13 mm in the wall for the transit of the cable. Do this at the place where later the lower half of the fixture will sit over it. You can use the enclosed drilling template. Attach the rear part of Plug the light into the in-lite 12V cable with the EASY-LOCK connector — no splicing. Use a licensed electrician for any new 120V outlet for the transformer.

Warranty

in-lite lights come with the standard in-lite manufacturer warranty (5 years on the in-lite 12V system), subject to in-lite’s terms and installation requirements.

Additional information

Light Finish

Dark Grey, Rosé Silver, White

Voltage

12V low voltage

Lighting Product Type

Wall Lights

Lighting Application

Patios & Pergolas, Walls & Fences

Light Direction

Down

Light Type

Diffuse

You may also like…