Cutek Colourtone Tints for Cutek Extreme Wood Oil

Description

Add Colour and UV Protection to Exterior Wood

Cutek Colourtone tints are specially formulated pigments that are added to Cutek Extreme Wood Oil to enhance colour and improve protection from UV exposure. While clear oil protects wood from moisture and weathering, adding a tint significantly increases resistance to sun damage and wood greying.

These concentrated colour tints allow you to customize the appearance of your exterior wood while maintaining the penetrating protection that Cutek oil is known for.

Cutek Deck Oil Colour Chart

Cutek Colourtone tints are available in a range of natural wood tones designed to enhance the appearance of exterior wood while improving UV protection. The colour chart above shows examples of how different tints may appear when mixed with Cutek Extreme Wood Oil.

Actual colour results may vary depending on wood species, surface preparation, and the number of coats applied. Always test the colour on a small area before applying to the entire project.

Why Use a Tint with Wood Oil

Exterior wood exposed to sunlight will naturally fade and grey over time. Adding a tint to Cutek oil introduces pigments that absorb UV radiation, helping to slow down the weathering process and maintain the wood’s natural appearance longer.

Using a Colourtone tint also allows you to highlight the grain and character of the wood while achieving the desired tone for your project.

Ideal Applications

Cutek Colourtone tints are suitable for a wide range of exterior wood surfaces including:

• Decks and deck boards
• Pergolas and timber structures
• Wood siding and cladding
• Fences and gates
• Outdoor furniture
• Cedar, pressure-treated lumber, hardwood and softwood

Key Features

• Concentrated colour tints for Cutek Extreme Wood Oil
• Enhances the natural look of exterior wood
• Improves UV protection and colour longevity
• Helps slow down wood greying from sun exposure
• Available in a range of tones to suit different wood species
• Easy to mix with Cutek oil before application

How to Use Colourtone Tints

1. Select your desired Colourtone tint.
2. Mix the tint thoroughly into Cutek Extreme Wood Oil according to recommended ratios.
3. Stir well until the pigment is fully dispersed.
4. Apply the tinted oil to clean, prepared wood surfaces using a brush or applicator.
5. Allow the oil to penetrate the wood.

Always mix thoroughly before and during application to maintain consistent colour.

Recommended With

• Cutek Extreme Wood Oil
• Cutek Deck Brush
• Cutek Cutting Brush
• Cutek Wood Stripper
• Cutek Wood Reviver
• Cutek QuickClean