in-lite ACE UP-DOWN 12V LED Wall Light

From $210.84

Glare-free 12V LED wall light with a focused beam up and down — ideal for fences, walls, pergola posts and privacy screens.

Beam angle: 64°  |  Light reach: 3.5 m (11.5 ft)  |  355 lumens, 3000K, IP55

SKU: N/A Categories: , ,

Description

The in-lite ACE UP-DOWN is a 12-volt LED wall light that sends a focused beam of light both up and down. Mount it on a wall, fence, pergola post or deck privacy screen to create two clean lines of light that make outdoor spaces feel larger and safer after dark.

The LEDs sit deep inside the aluminum housing, so the light does not glare in your eyes. Choose from four finishes to match your fence, siding or railing, and fine-tune the beam with the ACE accessories listed below.

Features & Benefits

  • Up and down beam: Two focused light beams graze the wall above and below the fixture.
  • Glare-free: The light sources are recessed deep in the housing.
  • Safe 12V low voltage: Plugs into the in-lite cable system with the included EASY-LOCK connector — no electrician needed for the light itself.
  • Built for Canadian weather: Aluminum housing with FCBV coating, IP55 rated.
  • Warm white light: 3000K with a high colour rendering index (CRI 92), so wood, stone and plants look natural.
  • Adjustable look: Narrow the beam with SHUTTER 1 or soften it with an ACE lens (sold separately).

Specifications

Specification ACE UP-DOWN (12V)
Beam angle 64° (up and down)
Light reach 3.5 m (11.5 ft)
Light direction Up and down
Type of light Direct
Light output 355 lumens
Luminous intensity 205.8 cd
Colour temperature 3000K warm white
CRI 92
Voltage 12V low voltage
Power / VA value 6.5 W / 10.3 VA (use VA to size the transformer)
Efficiency 55 lm/W
Dimensions (L × W × H) 95 × 64 × 120 mm (3.7″ × 2.5″ × 4.7″)
IP rating IP55
Housing / lens Aluminum, FCBV coating / polycarbonate lens
Mounting surface Wood, concrete or stone
Best for Fences, walls, facades, posts and canopies
Finishes Rosé Silver, Dark Grey, White, Corten

What’s in the Box

  • 1 × ACE UP-DOWN fixture with 60 cm (24″) fixture cable
  • 1 × EASY-LOCK connector
  • 2 × nylon wall plugs
  • 2 × screws
  • 1 × Torx wrench

What You Need

Transformer

in-lite HUB or in-lite SMART HUB (app control and dimming)
Add up the VA values of all your lights — each ACE UP-DOWN uses 10.3 VA — and choose a transformer with enough capacity.

Cable

in-lite 14/2 low-voltage cable
Main cable run from the transformer to your lights.

Extension cords

CBL-EXT 1 m or CBL-EXT 2 m
Use when the fixture is mounted higher than the 60 cm fixture cable reaches.

Beam accessories (optional)

SHUTTER 1 narrows the beam. ACE Lens Clear and ACE Lens Diffuse change the light pattern.

Installation Tips

in-lite recommends one ACE UP-DOWN every 2 to 2.5 metres (about 6.5–8 ft), mounted 1.4 to 1.8 metres (about 4.5–6 ft) high. Plug the fixture into the 12V cable with the EASY-LOCK connector — no splicing. Follow in-lite’s installation manual, and use a licensed electrician for any new 120V outlet for the transformer.

Corten finish: each Corten fixture is coated, sanded and acid-treated by hand, so colour and texture vary slightly from fixture to fixture.

Warranty

in-lite fixtures come with a standard 5-year manufacturer warranty, subject to in-lite’s terms and installation requirements.

Additional information

Dimensions 9.5 × 6.4 × 12 in
Light Finish

Corten, Dark Grey, Rosé Silver, White

Voltage

12V low voltage

Lighting Product Type

Wall Lights

Lighting Application

Decks & Railings, Patios & Pergolas, Walls & Fences

Light Direction

Up & Down

Light Type

Direct

Mounting Surface

Concrete & Stone, Wood

You may also like…