in-lite WEDGE 12V LED Wall Light

$105.18

Produces a wide and attractive downward light. The in-lite WEDGE is a 12V low-voltage LED wall light (Wall light – ↨ 100mm/3.94″) for patios & pergolas, walls & fences.

Beam angle: 58°  |  Light reach: 1.5 m (5 ft)  |  33 lumens, 2800K, IP55

SKU: N/A Categories: , ,

Description

The in-lite WEDGE is a 12V low-voltage LED wall light (Wall light – ↨ 100mm/3.94″) for patios & pergolas, walls & fences.

Provides an indirect bundled Warm White light. Nice for lighting the fence, driveway or patio. Does not glare. Available in different colors: Dark Grey, White, Rose Silver. High quality FCBV coating. Combines well with other fixtures in the same color. Does the style of WEDGE appeal to you? Then be sure to check out our other WEDGE products: MINI WEDGE and WEDGE SLIM. The EASY-LOCK comes standard with this fixture. The cable length on this fixture is 60cm.

Features & Benefits

  • Produces a wide and attractive downward light
  • Designed for illuminating a fence or wall
  • Available in three sizes
  • Safe 12V low voltage — plugs into the in-lite cable with the EASY-LOCK connector, no electrician needed for the light itself
  • Weatherproof IP55 rating for Canadian outdoor use
  • 2800K warm white light with CRI 94 for natural colours

Specifications

Specification WEDGE (12V)
Beam angle 58°
Light reach 1.5 m (5 ft)
Light direction Downward
Type of light Diffuse
Light output 33 lumens
Colour temperature 2800K warm white
CRI 94
Voltage 12V low voltage
Power / VA value 1 W / 1.6 VA (use VA to size the transformer)
Dimensions (mm) L 100 × W 63 × H 100
IP rating IP55
Finishes Dark Grey, White, Rosé Silver
Best for Canopy, Facade, Fence/wall

What’s in the Box

  • WEDGE 
  • EASY-LOCK
  • 60 cm fixture cable
  • 2x screws
  • 1x Torx wrench
  • 1x drilling template

What You Need

Transformer

in-lite SMART HUB (app control) or in-lite HUB (light sensor and timer). Add up the VA of all lights — this light uses 1.6 VA.

Cable

in-lite 12V low-voltage cable from the transformer to the lights; CBL-EXT extension cords if the light sits further from the cable.

Masonry mounting

FIX 1 mounting plate for walls, benches and steps.

Sloped fences

FIT bracket to mount the light straight on an angled fence.

Installation Tips

WEDGE can be installed on walls and fences. Loosen the Torx screw at the bottom of the fixture, using the Torx wrench provided, and remove the cover. Provide a hole of at least Ø 13 mm in the wall for the passage of the cable. Do this at the place where later the lower half of the fixture will sit o Plug the light into the in-lite 12V cable with the EASY-LOCK connector — no splicing. Use a licensed electrician for any new 120V outlet for the transformer.

Warranty

in-lite lights come with the standard in-lite manufacturer warranty (5 years on the in-lite 12V system), subject to in-lite’s terms and installation requirements.

Additional information

Light Finish

Dark Grey, Rosé Silver, White

Voltage

12V low voltage

Lighting Product Type

Wall Lights

Lighting Application

Patios & Pergolas, Walls & Fences

Light Direction

Down

Light Type

Diffuse

You may also like…